Skip to main content

DIKEMAN LAMINATING CORPORATION

Home of EZ Stick GREEN
Home
Types of Lamination
EZ-Stick GREEN
EZ-Stick
Nature's Choice
BioLam
Aperture Lamination
Special Aperture
Tech Facts
Contact Us
Directions
A Memoriam

 

 EZ-Stick GREEN . . . the natural choice

 


 

__________________________________________________________________________

EZ-Stick GREEN is a new PVC Free process of producing window signs from material that is primarily Biodegradable & Compostable. It is the perfect alternative to plastic signs ... environmentally friendly while offering superior quality for less cost. Static cling or plastic/vinyl signs will NEVER decompose.

 

Ideal For:~ Window Graphics ~ Cooler Units ~ POP Displays ~ Counter Mats ~

                          Mouse Pads ~ Decorative Decals ... and much more

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Key Feature:

EZ-Stick GREEN is a process that enable you to produce a truly versatile two way window graphic that is more economical and environmentally responsible that the plastics presently used in the market place. It eliminates the need for expensive backer films, flood coating and reverse printing of plastics.

Most importantly, EZ-Stick GREEN is an environmentally sustainable alternative to petrochemical derived products. Its primary ingredients are natural and renewal/sustainable resources. The print quality far exceeds those of any plastic window signs.

 

 

 EZ-Stick GREEN can be applied to paper stocks:

 

Sheet sizes from 11" x 17" up to 42" x 81"

100# coated text to 100pt. board

Layout must allow 1" gripper on all 4 sides

Working loss is approximately 5%

 

 

                               EZ-Stick Low Tack                                   EZ-Stick Permanent

 

                                               Easy mounting and removes cleanly                                  Easy mounting to glass for a

                                               from glass. Repositionable during the                                stronger more permanent bond.

                                               installation process. Excellent clarity.                                 Good durability.

 

Installation: Product must be applied to a clean, dry and dirt/contamination free surface.

                             Firm pressure must be applied to increase the cold flow and contact of the adhesive with

                             the substrate. Time and temperature will increase the surface contact and adhesion values.

                             Low Tack is not removable from acrylic surfaces.

 

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Instructions:  EZ-Stick GREEN is designed for interior glass window use only and not intended for exterior window use as weather conditions will affect the adhesion. EZ-Stick GREEN is not intended for walls and cannot be removed from acrylic surfaces.

EZ-Stick GREEN must be tested on non glass surfaces. Testing does not guarantee future adhesion success on previously tested surfaces other than glass. Sheets must always be shipped FLAT  for successful installation: never roll or tube.

 

 

Purchaser shall use all information, recommendations and suggestions contained herein only as a guide. The information does not constitute a warranty nor guarantee of any type whatsoever. Purchaser should independently determine the suitability of all material and must confirm adaptability and other characteristics by conducting its own tests. Dikeman Laminating shall have no liability as a result of any loss, expense, damage, and cost, or other injury, which results from Purchaser's reliance on the information.