Skip to main content


Home of EZ Stick GREEN
Types of Lamination
Nature's Choice
Aperture Lamination
Special Aperture
Tech Facts
Contact Us
A Memoriam

EZ-Stick. . . . for synthetic substrates

This New Process offers superior performance for less cost than

expensive PSA and Transfer Tapes. Available in either a Low Tack

Removable or Permanent Adhesive.

        Ideal For:~          Window Graphics ~ Cooler Units ~ POP Displays ~ Counter Mats ~

                                      Mouse Pads ~ Decorative Decals ... and much more


Key Feature:

EZ-Stick eliminates the need for expensive backer films, flood coating and reverse printing.

This process enables you to produce two way signage for significantly less cost and

eliminates the need for extra press runs.

EZ-Stick can be applied to a wide variety of substrates, allowing printers a greater choice

of stocks. The opposite side can also be finished with a Write & Wipe film for use with dry

or wet erase markers.

Planning:   EZ-Stick can be applied to:

    • Sheet sizes from 11" x 17" up to 42" x 81"
    • Stock thickness: 6 mil to 100 mil. including foam board.
    • Plastics such as vinyl, styrene, PETG, synthetic papers & more.
    • Sheet layout must allow 1" gripper on all sides, working loss is approx. 5%.


Type:                    EZ-Stick Low Tack                                                          EZ-Stick Permanent

                             Easy mounting and removes cleanly                                  Easy mounting to glass for

                             from glass. Repositionable during the                                 a stronger more permanent

                             installation process. Excellent clarity. bond.                       Good durability.


Installation:        Product must be applied to a clean, dry and dirt/contamination free surface.

                              Firm pressure must be applied to increase the cold flow and contact of the adhesive with

                              the substrate. Time and temperature will increase the surface contact and adhesion values.

                              Low Tack is not removable from acrylic surfaces.





EZ-Stick sheets must be packed and shipped FLAT for successful installation.

Never roll, tube or ship sheets in any other manner. Not intended for walls.